Main line oil pumps of NM 10000-380-2 category and electric driven pumps based upon
APPLICATIONS:
The pumps are designed for the oil pipeline systems with a pressure up to 10 MPa (installed in the "East Siberia – Pacific Ocean I" pipeline system).
ADVANTAGES AND DESIGN FEATURES:
The pumps and pumping assemblies are designed for operation in the following conditions:
in the regions with moderate and cold climate with a temperature range from +1 to +40°С;
in explosion-hazardous areas of Class 2 according to DIN;
in areas with seismicity of up to 9 on a МSК-64 scale.
Design features:
Potential replaceable rotors application in the same frame;
The pump structure allows to adjust parameters by changing the pump shaft rotation rate;
The pump structure allows to dismantle the pump and remove the rotor without disconnecting from the process pipes;
Pump shaft mechanical seals – double face seals with locking system. The pump structure allows to replace face seals without removing bearing housing;
Oil supply to the pump and engine bearings is carried out from the unit’s lubrication system with installed electric heaters accounted for oil heating;
Pumping units based on NM 10000-380-2 are equipped with tools from leading global manufacturers such as explosion-proof electric motors, couplings, high-efficiency air cooling devices.
TECHNICAL PARAMETERS:
Capacity – 12000 m3/h
Head – from 200 m to 360 m
Replaceable rotors for the following displacements - 7000 m3/h
Main line oil pumps of NM 7000-250-3.1 category and electric driven pumps based upon
APPLICATIONS:
The pumps are designed for oil pipeline systems (installed in the pipeline system “Purpe – Samotlor”).
ADVANTAGES AND DESIGN FEATURES:
The pumps and pumping units are designed for operation in the following conditions:
in the regions with moderate and cold climate with a temperature range from +1 to +40°С);
in explosion-hazardous areas of Class 2 according to DIN;
in areas with seismicity of up to 9 on a МSК-64 scale
Design features:
Potential replaceable rotors application in the same frame;
The pump structure allows to adjust parameters by changing the pump shaft rotation rate;
The pump structure allows to dismantle the pump and remove the rotor without disconnecting from the process pipes;
Mechanical seals of the pump’s shaft - mechanical cartridge-type face seals with additional sealing from the atmosphere side. Face seals cleanup is carried out with the help of hydro-cyclone separators of the oil pumping out, supplied from the pump decreasing space to face seals chambers as coolant medium. The pump structure allows to replace mechanical seals without removing bearing housings;
Oil supply to the pump and engines bearings is carried out from the unit's individual lubrication system;
The units based on NM 7000-250-3.1 are equipped with tools from leading global manufacturers such as explosion-proof electric motors, couplings, frequency transformers, etc.
TECHNICAL PARAMETERS:
Capacity – 7000 m3/h
Head – from 180 m to 250 m
Replaceable rotors for the following displacements – 2,786; 3,660; 4,060; 5,960 and 7,320 m3/h
Main line oil pumps of NM 10000-250-3, NM 7000-250-3 categories and electric driven pumps based upon
APPLICATIONS:
The pumps are designed for operation in the oil pipeline systems (installed in the pipeline system “East Siberia – Pacific Ocean II”).
ADVANTAGES AND DESIGN FEATURES:
The pumps and pumping assemblies are designed for operations in the following conditions:
in the regions with moderate and cold climate with a temperature range from +1 to +40°С);
in explosion-hazardous areas of Class 2 according to DIN;
in areas with seismicity of up to 9 on a МSК-64 scale
Design features:
Potential replaceable rotors application in the same frame;
The pump structure allows to adjust parameters by changing the pump shaft rotation rate;
The pump structure allows to dismantle the pump and remove the rotor without disconnecting from the process pipes;
Mechanical seals of the pump’s shaft - mechanical cartridge-type face seals with additional sealing from the atmosphere side. Face seals cleanup is carried out with the help of hydro-cyclone separators of the oil pumping out, supplied from the pump decreasing space to face seals chambers as coolant medium. The pump structure allows to replace mechanical seals without removing bearing housings;
Oil supply to the pump and engine bearings from the hydro couple and the lubrication system;
The units are equipped with tools from leading global manufacturers such as hydro couples, electric motors with various explosion protection types (among them with purge under gage pressure), air compressor plants, etc.
TECHNICAL PARAMETERS:
NM 10000-250-3 pumps: Capacity –10000 m3/h,
Head - from 180 m to ÷250 m.
Replaceable rotors for the following displacements – 4,500; 5,250 and 9,150 m3/h
NM 7000-250-3 pumps:
Capacity – 7000 m3/h,
Head - from 185 m to 265 m.
Replaceable rotors for the following displacements – 4,500; 5,250 and 7,500 m3/h
